The field of advanced composite materials Release agent Core requirements of
● Product white spot problem: the white spots on the surface of advanced carbon fiber products 3K cloth have troubled many enterprises;
● Rough product surface: waste a lot of manpower and material resources to fill and polish;
● Mold surface dirt: formed on the mold surface epoxy resin The scale has strong adhesion to the mold, so it is very difficult to clean it;
● Demoulding force: prepreg epoxy resin Because of its special viscosity, it is difficult to demould;
● Release agent transfer: release agent penetrates into the product, increasing the surface treatment time of the later process.

Deawa for advanced composite materials ® Five reasons for Diva
● No white spots: no white crystal and dirt will be transferred to the surface of carbon fiber or even embedded into the inside, and 3K carbon will not be removed due to excessive grinding force Fiber cloth Pierce, reduce product scrap;
● Product surface bright: deawa ® The surface of the product made by Dewar release agent is smooth and bright, and the time of soil filling and grinding is reduced by more than 30%;
● No need to worry about the dirty mold problem: give you a complete set of mold release agent + cleaning agent solution, saving a lot of manpower;
● The world's smallest demoulding force: completely solve the problem of product demoulding, mold separation, products can automatically come out;
● Saving manpower: deawa ® Dewar mold release agent does not transfer to the surface of the product, reducing post-processing grinding, sandblasting.
Highly recommended

1、 Product overview
deawa ®SC-977 Release agent Is a special resin release agent, can provide multiple demoulding effect, only need to apply it on the mold surface to let the solvent volatilize, the finished product will have high brightness without polishing.
2、 Features
1. Finished product surface bright 2, room temperature drying curing 3, no residue 4, low odor 5, no residue 6, multiple demoulding
3、 Nature
Appearance: colorless transparent liquid
Odor: hydrocarbon odor
Specific gravity: 0.735 ±
Shelf life: one year
Operating temperature: room temperature
Thermal stability after curing: 400 ℃
4、 Mold preparation
In order to get better release effect, dewa? Sc-977 release agent is applied to clean and dry mold surface, all wax, sealing agent and residual Release agent It must be cleaned. The residue on the mold can be cleaned with deawa? 688s or 553s.
5、 How to use it
Deawa? Sc-977 release agent can be applied at room temperature with a clean, dust-free cloth (but not a spinning cloth, because the solvent of the non-woven fabric will dissolve the adhesive).
1. Dip the release agent with a clean dust-free cloth, and then apply it evenly and orderly on the mold surface. It is required to have a smooth and moist film. Pay attention not to work on the mold surface that has just been wiped. It is required to have a smooth and moist coating.
2. After the whole mold surface is completely attached with dewa? Sc-977 release agent, gently wipe the mold surface with another clean dust-free cloth until the surface is smooth (when using the dust-free cloth, always replace the dust-free cloth to ensure that the mold is clean and has no lines). The purpose of wiping is to prevent the surface of the mold from being rubbed Release agent There are lines left by the time.
3. Apply 4-5 layers of release agent for new mold and 2-3 layers for old mold. Stay between each layer for 15-20 minutes to ensure that the solvent in the previous layer can be completely volatilized.
4. After the last coating is finished, it should be dried at room temperature for 30 minutes before making the product. (curing standard: the cured bottom film should be dry and non sticky)
5. When the deawa? Sc-977 release agent has a good combination with the mold surface, it can get a better release effect. If some parts are difficult to leave the mold, they can be fully repainted or partially repainted.
Storage
Deawa? Sc-977 release agent should be used in an air circulation environment. Store in a dry, cool place. Keep the lid sealed when not in use.
Advantages of mountains and rivers / SHANCHUAN ADVANTAGE


Contact Yamakawa / CONTACT SHANCHUAN
Qingdao Shanchuan Materials Co., Ltd
Order hotline:
400-993-7117
Csquanz @ csshanch
QQ consultation: 3296126952
Contact person: Manager Xu 15963200888
Company website: potmanhotpot.com
Address: 275 Chongqing North Road, Chengyang District, Qingdao
Room 0327 ziyue International
好彩客苹果补丁 Dewar release agent sc-977 carbon fiber release agent